教程/铁路转换/Zh

From OpenTTD
(Difference between revisions)
Jump to: navigation, search
Line 20: Line 20:
 
*桥梁和隧道:点击它的一端.
 
*桥梁和隧道:点击它的一端.
 
*车站:必须转换每一格站台.不然可能搞混车站内的铁道类型 ([[Nonuniform_stations|Nonuniform stations]]).
 
*车站:必须转换每一格站台.不然可能搞混车站内的铁道类型 ([[Nonuniform_stations|Nonuniform stations]]).
*确认铁轨上没有火车.运行中的火车请送入车库然后出售[[Sell_entire_train|出售整列火车]] (除非从标准铁道转成电气化轨道,列车可以共用).
+
*确认铁轨上没有火车.运行中的火车请送入车库然后出售[[Sell_entire_train|出售整列火车]] (除非从标准铁道转成电气化轨道).
  
* You can convert rails under trains from [[railways|normal railway]] to [[electrified_railways|electrified railway]]. It doesn't need to be empty.
+
*标准铁道转换为电气化铁路时,标准列车仍可行驶在新转换的路线上,并且在运行时就可以转换.
  
 
* You can convert only to those types that are available.
 
* You can convert only to those types that are available.

Revision as of 07:09, 4 June 2016


Contents

转换铁路

要选择转换的铁道类型,点击并按住主工具条菜单铁路建设按钮,会显示铁道类型选项. Convert rail menu.png
选择一个选项后,下列工具条之一会显示:

标准铁道建设工具条
电气化铁道建设工具条
单轨铁道建设工具条
磁悬浮铁道建设工具条

然后点击 转换所有 按钮Convert rail.png 在已建好的轨道上拖动并释放.此工具可用于 铁轨 车库 桥梁 隧道 车站路点

  • 桥梁和隧道:点击它的一端.
  • 车站:必须转换每一格站台.不然可能搞混车站内的铁道类型 (Nonuniform stations).
  • 确认铁轨上没有火车.运行中的火车请送入车库然后出售出售整列火车 (除非从标准铁道转成电气化轨道).
  • 标准铁道转换为电气化铁路时,标准列车仍可行驶在新转换的路线上,并且在运行时就可以转换.
  • You can convert only to those types that are available.
Mixed railtypes
Mixed railtypes

Diagonal tracks

In OpenTTD there can be only one type of track on each tile (except the normal railway and electrified railway) so it is possible that you have to rebuild your railways first if you would like to mix the type of your close diagonal railway lines.

too close to mix the railtypes
separate tiles for different railtypes

Tips

  • To save time converting a train with lots of orders from one railtype to another, send your train to a depot of the old type and sell it. While the depot window is still open, convert the depot to the new railtype, and the next train you build will have all the orders of your previous train. The depot window must remain open throughout this operation. Note that you can only convert one train at a time using this method, but you may also convert the empty depot back to the old railtype so you can convert another train using the same depot.
  • For converting to a compatible railtype (e.g. electrified railway), updating trains is not immediately necessary as steam and diesel trains run perfectly on electrified rails. Electrified trains, however, will not pass over non-electrified tiles.
  • Vehicle replacement (Autoreplace) doesn't work cross-depot.
  • You can use the go to depot order for all trains that use the line you would like to convert or use the vehicle list where you can send all (or grouped) trains to the nearest depot.

See Also

Personal tools