Bouw sporen/Nl

From OpenTTD
(Difference between revisions)
Jump to: navigation, search
m (Update link)
Line 93: Line 93:
 
You will find that you can become very proficient at laying tracks if you master the '''A''', Ctrl+A and '''D''' shortcut keys - A for Autorail (Ctrl for remove) and D for Dynamite. Use '''X''' to toggle tree and building transparency/visibility - also very useful.  See also the [[Hotkeys|list of shortcut keys]].
 
You will find that you can become very proficient at laying tracks if you master the '''A''', Ctrl+A and '''D''' shortcut keys - A for Autorail (Ctrl for remove) and D for Dynamite. Use '''X''' to toggle tree and building transparency/visibility - also very useful.  See also the [[Hotkeys|list of shortcut keys]].
  
<span style="float: right">[[Depo bouwen/Nl|'''Volgende''': Depo’s bouwen]] &raquo;</span>
+
<span style="float: right">[[Depots bouwen/Nl|'''Volgende''': Depots bouwen]] &raquo;</span>
  
 
[[Category:Spoorwegen/Nl]]
 
[[Category:Spoorwegen/Nl]]

Revision as of 22:48, 25 November 2010

Translation.png

Dit artikel wordt vertaald vanuit het oorspronkelijk Engelse artikel: Building tracks.

Percentage: 5%
  

U kunt een bijdrage leveren door te helpen bij het verbeteren van de tekst.

  • Maak gebruik van de Stijlhandleiding voor de juiste bewerking.
  • Vergeet niet om dit sjabloon te verwijderen zodra het artikel correct vertaald is.


In deze tutorial leert je de nodige vaardigheden om sporen aan te leggen en vervolgens om sporen te verwijderen.

Contents

Hoe leg ik sporen aan?

Om the beginnen, moet je eerst de toolbar Bouw spoorwegen openen - klik hiervoor op de knop Bouw spoorwegen Manual html m772c5b23.png in de menubar:

De toolbar Bouw spoorwegen

Naast het aanleggen van sporen op vlakke terreinen kan er ook gebouwd worden op hellingen. Er zijn 2 manieren om dit te doen:

  • Door gebruik te maken de eerste 4 knoppen om in 1 richting sporen aan te leggen (gemakkelijk, maar traag)
  • Door gebruik te maken van de autorail tool (iets minder makkelijker, maar veel sneller)

Bouwen met de gerichte spoor knoppen

Druk op een van de spoorweg bouw knoppen ( Build rail.png ). Het voorbeeld gebruikt de 4e knop.

Spoor aanleggen

  1. Plaats de cursor boven de tegel waar je je spoor wilt beginnen en druk op de linker muisknop.

Nieuw spoor aanleggen
  1. Sleep de cursor naar waar het spoor moet eindigen.
    Nieuw spoor aanleggen
  2. Laat de muisknop los en het spoor zal verschijnen.
    Je nieuwe spoor

Spoor verwijderen

Om spoor te verwijderen selecteer je het Verwijder gereedschap ( Verwijder knop ). Het witte vierkant zal nu rood worden. Nu kun je over bestaande sporen klikken en slepen om ze te verwijderen. Klik nogmaals op de Verwijder knop om het uit te zetten. Je kunt ook de R knop als shortcut gebruiken.

Using Autorail tool

First select the Autorail button ( Autorail button ) from the railway construction toolbar. You cursor will change to represent Autorail feature.

Selecting Autorail feature

Placing tracks

  1. Placing horizontal/vertical straight pieces (along squares) is the easiest. Put your cursor over any square and click & drag along the squares. The white lines represent your future tracks.
    You can click in a square and move your mouse in different directions to see how new tracks would be placed.
    Laying a straight piece of tracks
  2. Release your mouse cursor and you will have built a straight piece of tracks.
    A newly built straight piece of tracks
  3. Placing diagonal tracks is just the same, click & drag from one square to another. Note that a diagonal track, unlike a horizontal / vertical track, occupies only half a square - meaning you can put two diagonal tracks onto one square.
    Laying a diagonal piece of tracks
  4. Autorail tool works fine with hilly terrain, showing you how tracks will be placed on a non-uniform landscape.
Laying a piece of tracks over a hilly terrain
Laid a piece of tracks over hills

Removing tracks

There are two ways to remove pieces of tracks (besides the dynamite ( Dynamite tool ) tool)

  • The easy way to remove tracks is to hold down the CTRL key.
  1. To remove a piece of tracks, hold CTRL and click & drag along existing piece of tracks. Just as you would when building tracks.
    Deleting a piece of tracks (with CTRL)
  2. Release the mouse and the tracks will be sold.
    A newly deleted piece of tracks
  • The second way is to select the Remove tool ( Clear button ). The white rail-lines will change to red lines. Now you can simply click & drag along the existing tracks to remove them. Click the tool button again to deselect it. You can also use the R key shortcut. Note that where you have two diagonal pieces of track running alongside each other in the same square, you need to be accurate and only click the actual piece track you want to remove. Just clicking anywhere in the square is not the way to do it.
Deleting a piece of tracks with clear button

Connection types

There are two angles at which the tracks can connect.

45°

Below is a 45° connection, a train can pass through one such connection without slowing down. However, if the same train is on more than one 45° connection at once, it will slow down.

45° rail connections

90°

This is a 90° connection. A train slows down considerably every time is has to pass one of these.

If the advanced setting "Forbid trains and ships to make 90° turns" is enabled, then trains cannot pass this kind of connection and will stop and reverse like the end of the line.

90° rail connections

You will find that you can become very proficient at laying tracks if you master the A, Ctrl+A and D shortcut keys - A for Autorail (Ctrl for remove) and D for Dynamite. Use X to toggle tree and building transparency/visibility - also very useful. See also the list of shortcut keys.

Volgende: Depots bouwen »

Personal tools