OpenTTD | Estaciones

Problems

Linked page "en/Vehiculos" does not exist (wikilink "[[en/Vehiculos]]").
Linked page "en/Carga" does not exist (wikilink "[[en/Carga]]").
Source

You do not have permission to edit this page, because you are not logged in.
You can view and copy the source of this page.
[[Translation:en/Manual/Stations]]
{{es/Traducción|en/Manual/Stations|0}}

[[File:en/Manual/Stations.png|right]]

'''Las estaciones''' son una parte importante de cualquier red. Es donde se almacena la [[en/Carga]] y se cargan o descargan los [[en/Vehiculos]]. The cargo is delivered from and to the buildings in the station's [[en/Manual/Catchment area]]. Every station costs 50 pounds/100 euro a month to maintain, regardless of size.

Each mode of transport has its own type of station:
*'''[[en/Manual/Railway station]]''' are used by [[en/Manual/Trains]].  The basic station layout remains the same for all [[en/Manual/Base Set/Types of railway]].
*'''[[en/Manual/Airports]]''' are the loading and unloading points for aeroplanes. There are many types of airport including [[en/Manual/Airports]]s for [[:Category:en/Manual/Base Set/Aircraft/Helicopters|helicopters]].
*'''[[en/Manual/Water Transport Tiles]]''' are where your [[en/Manual/Ships]] berth.
*'''[[en/Manual/Loading Bays]]''' are where [[en/Manual/Base Set/Road Vehicles/Buses]] and [[en/Manual/Road vehicles]] load and unload their cargo.

==Combining stations==
Stations you place directly adjacent to one another (of any kind) will combine to form one logical station.  That is, they share their cargo acceptances, name and pool of cargo to be collected.  They of course maintain their physical location and layout.   So for example, you could have a train station with a bus station attached - the bus station would share a pool of cargo with the train station, but allow passengers to be picked up and dropped off by buses as well as trains.

You can combine stations for many reasons:
*To set up a feeder service where one mode of transport transfers cargo to another, which takes it on to its new destination
*To extend the [[en/Manual/Catchment area]] of a station (up to the size given in the Maximum station spread [[en/Archive/Manual/Settings/Advanced Settings|setting]])
*To alleviate overcrowding on a station with additional terminals
*To reduce the maintenance costs that come with multiple stations.

There's a limit for the maximum area a combined station can cover. By default the limit is 12 x 12 tiles, it can be changed in the [[en/Archive/Manual/Settings/Advanced Settings/Stations#max-station-spread|stations section of the advanced settings window]]. It's possible to build a separate station directly next to a station of maximum size by Ctrl-leftclicking on the desired tile and selecting to create a separate station, as described below.

Note for original ''Transport Tycoon'' and ''Deluxe'' players: in OpenTTD you can connect 2 or more same kind  of stations (e.g. conventional railway station with monorail station), similar to ''Chris Sawyer's Locomotion'' except with greater extending freedom.

===Building non-physically attached stations===
[[File:en/Manual/Join station leftclick.png|thumb|Joining newly constructing station by Ctrl-leftclicking]]

Combined stations need not be physically adjacent to each other - at least not in the long run.  You can build a chain of stations and delete intermediate links in that chain, and the "detached" stations will still be part of the same logical station.

From 0.7.0-beta1 onward you can also build combined stations by Ctrl-leftclicking when placing a new station. A popup window will ask which station you want to join to, or build a new station. Stations which are too far away from the place you clicked won't be listed. You also have to hold Ctrl when extending any part of that station and new extension is physically adjacent to any part of that station.

===Deleting combined stations===
You can remove a component of a combined station using the dynamite tool which will remove just that individual station, not the overall thing.  The exception to this is train stations, where dynamiting one part of a train station will remove all of them (or not, if there are trains in any of them).  To remove these, you should select the "build station" tool [[File:en/Manual/Build station.png]] and then the "clear" tool [[File:en/Manual/Toggle clear active.png]] which will allow you to remove train stations one tile at a time.

Care should be taken if deleting part of a combined station that is physically separate from the rest of the combined station if you want to replace it afterwards.  Simply replacing it will create a new, separate logical station - to keep it attached you will either have to link-and-delete out from one of the attached stations, or starting from OpenTTD 0.7.0-beta1 using the Ctrl-leftclicking method as mentioned in the previous section.

[[Category:es/Manual/Construcción]]
Problems

Source

Templates

Used on pages
